TM 5-3895-369-14
4-47. FUEL LINES AND FITTINGS REPLACEMENT (CONT).
(4) Install fuel tubes on filter head as follows:
(a) Install two sealing washers (41), fuel tube (42) and banjo screw (40) on filter head (34) and lift
pump (43).
(b) Install fuel tube (36) and fuel tube (33) with two grommets (37) and adaptor (38).
(c)
Install fuel tube (36) on injection pump (4) and tighten connector (35) securely.
(d) Install two sealing washers (32), fuel tube (33), and banjo screw (31) on filter head (34). Tighten
screw 78 lb-in (9 Nm).
(e) Install sealing washer (30) and screw (29).
4-214
