TM 5-3895-359-14&P
SUBSECTION 13 V.P.I. FLUID HANDLING SYSTEM
INTRODUCTION
The V.P.I. System operates on an electrical balance
principle that integrates the fluid rate of flow with the
Stabilizer travel speed indicating the degree of balance
through a proportioning meter for a specified application
rate.
The total system, figure 1, can be separated into four (4)
basic units consisting of:
1. Meter Recording Unit
2. Travel Speed Unit
3. Application Rate Unit
4. Proportioning System Unit
Refer to this diagram when studying the component
descriptions on the following pages.
FIGURE 1
13-1
