TM 5-3895-342-34
b. Disassembly. Disassemble the gear cover in
reverse of numerical sequence as illustrated in figure 3-
11.
e. Installation. Install the gear cover in reverse of
the instructions in subparagraph a above.
Note. When reassembling, tighten capscrews 14 to
3-13. Timing Gears and Gear Cover Spacer.
a. Removal.
and idler gear shaft, and remove the idler gear and shaft
1.
Plain incased seal
2.
Pin, straight headed
3.
Pin, straight headless
4.
Gear housing cover
Figure 3-11. Gear cover, exploded view.
c.
Cleaning and Inspection.
(1) Clean all parts with cleaning solvent.
(2) Inspect all parts for wear or damage.
Replace worn or damaged parts.
d. Reassembly. Reassemble the gear cover in
Figure 3-12. Idler gear and shaft removal
3-17