TM 5-3895-372-10
Figure 3-27. Liquid Admix Strainer Service
(4) Using a wrench, remove cap (3).
(5) Remove strainer screen (2) from housing (1).
b. Cleaning and Inspection.
(1) Clean filter using cleaning agent recommended by admixture manufacturer. Then use water.
(2) Clean out housing (1).
(3) Inspect strainer screen for corrosion, rust and punctures. Replace if there are punctures or indications that
the screen is clogged.
c. Installation.
(1) Install screen (2) into housing (1).
(2) Install cap (3) and tighten using a wrench.
(3) Install draincock (4).
(4) Close draincock (4).
TA 075574
3-73
