TM 5-3895-372-10
Figure 3-31. Check Auger Shaft
3-20. Stone and Sand Gate Adjustment.
a. Preparation.
(1) Empty stone and sand bins (para 3-11 b).
(2) Clean the conveyor belt area under the gates thoroughly.
b. Adjustment.
CAUTION
Any aggregate between gate opening gage and belt will result in a wrong adjustment.
(1) Raise gate to full open position.
(2) Place gage (3, fig. 3-32) on the conveyor belt directly below gate, in a horizontal position.
(3) Lower the gate (2, fig. 3-32) to rest firmly on the gage.
TA 075578
3-77
