TM 5-3895-369-14
4-102. CLUTCH DRIVE SHAFT REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: automotive
Wrench, torque
Equipment Condition
TM or Para
Para 2-13
Para 2-2
Condition Description
Parking brake set.
Clutch in neutral.
Materials/Parts
Lockwashers (8)
a.
Removal.
(1)
Remove four screws (1) lockwashers (2)
and flange yoke (3) from output flange (4).
Discard lockwashers.
(2)
Remove four nuts (5), lockwashers (6),
screws (7) and flange yoke (8) from pillow
block (9). Discard lockwashers.
(3)
Remove drive shaft (10) from vehicle.
b. Installation.
(1)
Position drive shaft (10) on vehicle.
(2)
Install flange yoke (8) on pillow block (9)
with four screws (7), lockwashers (6), and
nuts (5). Tighten nuts 75 to 85 lb-ft
(101.68 - 115.24 N•m).
(3)
Install flange yoke (3) on output flange (4)
with four lockwashers (2) and screws (1).
Tighten screws 75 to 85 lb-ft (101.68 -
115.24 N•m).
END OF TASK
4-368
