TM 5-3895-369-14
5-84. VALVE BANK ASSEMBLY REPAIR (CONT).
(4) Push spool (10) toward rear of valve
body (4), until front seal (11) is exposed.
Carefully remove and discard front seal.
(5) Push spool (10) toward the front of the valve
body (4). until rear seal (12) is exposed.
Carefully remove and discard rear seal.
(6) Remove spool (10) from the front of the
valve body (4).
(7) Repeat steps (1) thru (6) for other two spool
assemblies.
(8) Remove relief body (13), preformed
packing (14), washer (15). and relief
spring (16) from valve body (4). Discard
preformed packing.
(9) Carefully tip valve body (4) and remove
spring spacer (17) and relief ball (18).
(10) Relief valve seat (19), preformed
packing (20), and check poppet (21).
Discard preformed packing.
(11) Remove two nuts (22 and 23), adjusting
screw (24) and preformed packing (25) from
relief body (13). Discard preformed packing.
5-498
