TM 5-3895-369-14
5-81. HYDRAULIC GEAR PUMP ASSEMBLY REPLACEMENT (CONT).
Removal.
a.
NOTE
Tag and mark all hydraulic hoses
before removal.
Place suitable container with a
5 gallon capacity (19 liters) under
pump to catch spilling fluid.
Install protective plugs in pump and
hoses upon removal.
(1) Disconnect two hoses (1 and 2).
(2) Note position and remove two elbow pipes
(3 and 4) and preformed packings (5 and 6).
Discard preformed packings.
(3) Remove four screws (7), lockwashers (8).
and two coupling halves (9).
Discard lockwashers.
(4) Remove hose (10) and preformed
packing (11) from pump (12). Discard
preformed packing.
5-478