TM 5-3895-369-14
Installation.
e.
(1) Install motor (7) to pump frame (15) with
two screws (14), lockwashers (13), and
nuts (12). Tighten nuts 75 to 85 lb-ft
(102 - 115 Nm).
NOTE
Ensure that hole patterns on bushing
and sprocket match when installing on
motor shaft.
(2) Install sprocket (11) on motor shaft (9) and
install bushing (8) in sprocket.
(3) Install two setscrews (10) in bushing (8).
(4) Alternately tighten setscrews 23 lb-ft
(32 Nm).
(5) Using a drift, tap bushing (8) until
measurement recorded during removal is
reached. Tighten setscrews (10) again
75 to 85 lb-ft (101 - 116 N m).
5-475