TM 5-3895-369-14
(3)
Install preformed packing (21) and
spacer (22).
(4)
Install rectifier (20) in housing (2) with three
spring washers (19) and screws (18).
(5)
Align matchmarks, position stator (17) in
housing (2), and install rotor (16).
(6)
Install capacitor (15) with screw (14).
(7)
Install regulator brush assembly (13) with
two lockwashers (12) and screws (11).
(8)
Install fiber washer (8), washer (7),
lockwasher (6), and nut (5).
(9)
Connect two connectors (9 and 10).
(10) Align matchmarks and install shield (1) on
housing (2) with eight screws (3 and 4).
NOTE
Follow-on maintenance: Install alternator (para4-70).
END OF TASK
5-289
