TM 5-3895-369-14
(16) Immerse roller bearing (97) in calibration fluid.
(17) Install roller bearing (97) with roller holder pin (%) is facing timing piston (98).
(18) Slide holder pin (%) in timing piston (98).
(19) Check timing piston (98) by moving back and forth. If movement is not smooth, slide holder pin (96) from
timing piston (98) and apply grease to holder pin and repeat step (18). If movement is smooth, go to
step (20).
(20) Immerse pin (95) in calibration fluid.
(21) Install pin (95) and clip (94).
(22) Apply grease to two preformed
packings (91 and 88).
(23) Install two shims (92), spring (93),
preformed packing (91), left access
cover (90), and two screws (89). Tighten
screws 60 to 86 lb-in. (7 - 10 Nm).
(24) Install preformed packing (88), right access
cover (87), and two screws (86). Tighten
screws 60 to 86 lb-in. (7 - 10 Nm).
5-253