TM 5-3895-369-14
5-11. CYLINDER BLOCK REPAIR.
This task covers:
a. Inspection
c. Cleaning
d. Assembly
b. Disassembly
INITIAL SETUP
Tools
Equipment Condition
Shop equipment, general purpose repair: semi-
TM or Para
Condition Description
trailer mounted
Engine removed.
Oil cooler removed.
Cylinder head assembly
Materials/Parts
removed.
Chips, soap (item 10, appendix E)
Detergent (item 19, appendix E)
Camshaft removed.
Solvent, drycleaning (item 54, appendix E)
Crankshaft removed.
Oil, fuel (item 30, appendix E)
Oil, lubricating (item 36, appendix E)
Compound, retaining (item 18, appendix E)
Compound, sealing, pipe thread (item 17,
a.
Inspection.
(1) Check cylinder bores at position A
approximately 1 in. (25.4 mm) deep and at
4.5 in. (144.3 mm) deep. Normal
measurement is 4.0157 to 4.0203 in. (102.0 -
102.116 mm). If measurement is not within
limits, use oversized pistons and rings to
compensate.
5-119