TM 5-3895-369-14
5-14. CRANKSHAFT REPLACEMENT/REPAIR.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools
Personnel Required
Shop equipment, contact maintenance: truck
MOS62B, Construction equipment repairer (2)
mounted
Equipment Condition
Materials/Parts
TM or Para
Condition Description
Solvent, drycleaning (item 54, appendix E)
Engine installed on stand
Oil, lubricating engine (item 35, appendix E)
Gear housing removed.
Brush, nylon tube (item 7, appendix E)
Oil pan and suction tube
Wear sleeves, top
removed.
Wear sleeve, bottom
Grease, general purpose (item 25, appendix E)
General Safety Instructions
Gloves, protective thermal
If engine has recently been in operation, allow
Tags, identification (item 55, appendix E)
engine time to cool before performing procedure,
8.
Removal.
(1) Measure and record end play at gear end of
crankshaft (1) at position A. Normal
measurement is 0.005 to 0.010 in.
(0.13 - 0.25 mm). If measurement is above
or below normal, correct with proper thrust
bearing in installation.
5-137
