TM 5-3895-369-14
4-43. TURBOCHARGER AIR INLET HOSE REPLACEMENT.
This task covers:
c. Installation
b. Cleaning/Inspection
a. Removal
INITIAL SETUP
General Safety Instructions
Tools
If engine has recently been in operation, allow
Tool kit, general mechanics: automotive
time for cooling before performing procedure.
Wrench, torque
Equipment Condition
Condition Description
TM or Para
Negative battery cable
disconnected.
Hood removed.
Removal.
a.
NOTE
To remove air inlet hose as an assembly, perform steps (1) through (3) only.
(1) Loosen clamp (1) and remove elbow hose (2) from turbocharger (3).
(2) Loosen clamp (4) and remove hump hose (5) from air cleaner housing (6).
(3) Remove air inlet hose as an assembly.
(4) Remove two clamps (1 and 4).
4-198
