TM 5-3895-369-14
4-152. ADDITIVE CHAIN REPLACEMENT.
This task covers:
b. Installation
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Condition Description
TM or Para
Tool kit, general mechanic's: automotive
Negative battery cables
disconnected.
Additive coupling guard
removed.
Removal.
a.
NOTE
Refer to paragraph 2-12, steps 4, 5, and 6 to center master link.
(1) Center master link pin (1) over hole in bottom of bracket (2).
(2) Remove link retainer (3).
(3) Loosen two nuts (4) on two screws (5) attaching motor (6) to bracket (2).
(4) Raise motor (6) and remove master link pin (7), three spacers (8), and chain (9) from sprocket (10).
b. Installation.
(1) Install chain (9) on sprocket (10) with three spacers (8) and master link pin (7).
(2) Tighten two nuts (4) on screws (5) attaching motor (6) to bracket (2).
4-498
