TM 5-3895-369-14
4-148. HYDRAULIC CROSS REPLACEMENT/REPAIR.
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
Materials/Parts
Tool kit, general mechanic's: automotive
Solvent, drycleaning (item 54, appendix E)
Tag, identification (item 55, appendix E)
Suitable container (capacity 1 gal. [3.8 liters])
Equipment Condition
Materials/Parts
TM or Para
Condition Description
Lockwashers (2)
Aft floor deck raised.
Cloth, lint-free (item 12, appendix E)
Forward floor plate
Fluid, hydraulic (item 23, appendix E)
removed.
Sealant, hydraulic (item 52, appendix E)
Hydraulic valve shut off
a.
Removal.
Hydraulic fluid is very slippery and can cause falls. To avoid injury, wipe up fluid with rags.
NOTE
Place suitable container with a 1 gallon (3.8 liters) capacity under cross to catch spilling fluid.
Tag and mark all hoses prior to removal.
(1) Tag, mark, and disconnect hose (1) from fitting (2) on flow control valve (3).
4-480