TM 5-3895-369-14
(3) Remove cotter pin (6) and pin (7) from shaft
end (8) of gate cylinder (3) and mounting
bracket (9). Discard cotter pin.
(4) Remove cotter pin (10) and pin (11) from
barrel end (12) of gate cylinder (1). Remove
cylinder from mounting bracket (13) on
rotor hood (14). Discard cotter pin.
c.
Installation.
(1) Install barrel end (12) of gate cylinder (3) in
mounting bracket (13) with pin (10) and
cotter pin (9).
(2) Install shaft end (8) of gate cylinder (1) in
mounting bracket (9) with pin (7) and cotter
pin (6).
(3) Connect hydraulic hose (4) to elbow (5) on
gate cylinder (3).
(4) Connect hydraulic hose (1) to elbow (2).
NOTE
Follow-on Maintenance: Check hydraulic fluid level and add fluid as needed (para 3-11).
END OF TASK
4-477
