TM 5-3695-369-14
Fuel and oil are slippery and can cause falls. To avoid injury, wipe up spilled fuel or oil with rags.
NOTE
Place suitable container with a 1 gallon (3.8 liters) capacity under hoses to catch spilling fluid.
Tag and mark hydraulic hoses before disconnecting.
Rotate hoses by hand while disconnecting to avoid kinking.
(1) Tag, mark and disconnect hose (1) from elbow (2).
(2) Tag, mark and disconnect hose (3) from elbow (4).
(3) Remove cotter pin (5), pin (6), and housing
end of boom hoist cylinder (7) from
mounting bracket (8). Discard cotter pin.
(4) Remove cotter pin (9), pin (10), and shaft
end of boom hoist cylinder (7) from
mounting bracket (11). Remove cylinder
from vehicle. Discard cotter pin.
b. Installation.
(1) Install shaft end of boom hoist cylinder (7)
in rotor mounting bracket (11) with pin (10)
and cotter pin (9).
4-474