TM 5-3895-369-14
Spilled hydraulic fluid is slippery. Clean
up spilled fluid immediately or injury to
personnel may result.
NOTE
Hydraulic hoses removed for clarity.
Place suitable container with a 1 qt.
(0.9 liter) capacity under sensor to
catch spilling fluid.
(3) Remove flow sensor (6), nipple (7), and
adaptor (8) from bank valve (9).
(4) Remove adaptor (8) from nipple (7) and
nipple from flow sensor (6).
b. Installation.
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(1) Apply hydraulic thread sealant to threads of adaptor (8) and install in valve bank assembly (9).
(2) Install nipple (7) and flow sensor (6) on adaptor (8).
4-471