TM 5-3895-369-14
b. Cleaning/Inspection.
(1) Inspect for damaged parts.
(2) Replace all damaged parts.
c.
Installation.
(1) Install wheel (2) on front axle (3).
NOTE
Apply a light coat of oil to screen threads
before installing.
(2) Install, in cross pattern, six screws (1).
Tighten finger tight or until wheel (2) is
snug.
(3) Remove jack stands and lower vehicle.
(4) Tighten six screws (1) to 130 to 150 lb-ft
(176 - 203 Nm) in pattern indicated.
(5) Repeat steps (1 through 4) for other wheel.
(6) Remove jack.
END OF TASK
4-407