TM 5-3895-369-14
(6) Install washer (5) and nut (4) on shaft (6). Tighten nut 35 lb-ft (47 Nm).
(7) Turn hub (2) several times. Tighten nut (4) again 35 lb-ft (47 Nm).
(8) Install cotter pin (3).
(9) Before installing plug (11), fill hub (2) with
grease until grease begins to come through
outer bearing cone (7). Install plug (11) in
hub (2).
(10) Install cap (1).
NOTE
Follow-on Maintenance: Install front wheel (para 4-115).
END OF TASK
4-403
