TM 5-3895-369-l4
4-114. REAR WHEEL REPLACEMENT.
This task covers:
b. Cleaning/Inspection
c. Installation
a. Removal
INITIAL SETUP
Personnel Required
Tools
MOS62B, Construction equipment repairer (2)
Tool kit, general mechanic's: automotive
Lifting jack (10,000 lb capacity)
Wrench, torque
Removal.
a.
Do not place jack under any location except specific jacking points. Otherwise, vehicle may fall
during maintenance and cause injury or death to personnel.
Rear wheel weighs 375 lbs (170 kg) and should not be allowed to fall. Injury or death to personnel
could result.
(1) Position jack under jacking point (para 4-17) on rear hitching frame and lift vehicle.
NOTE
Remove nuts in a cross-pattern fashion.
(2) Loosen 10 nuts (1) alternately on rear wheel (2).
4-404