TM 5-3895-369-14
Hydraulic fluid is very slippery and can
cause falls. To avoid injury, wipe up fluid
with rags.
NOTE
Tag and mark hydraulic hoses before
disconnecting.
Place suitable container with a 1 qt.
(0.9 liter) capacity under control unit
to catch spilling fluid.
(2) Tag, mark and disconnect two hydraulic
hoses (6 and 7) from control unit
assembly (4).
(3) Tag, mark and disconnect two hydraulic
hoses (8 and 9).
(4) Remove two nipples (10 and 11) and
preformed packings (12) from control unit
assembly (4). Discard preformed packings.
(5) Remove two elbows (13 and 14), preformed
packings (15), adapters (16 and 17), and
performed packings (18). Discard
preformed packings.
4-411
