TM 5-3895-369-14
4-86. BACK-UP HORN REPLACEMENT (CONT).
(4) Remove nut (9), lockwasher (10), and
screw (11) from bracket (5). Discard
lockwasher
(5) Remove back-up horn (12) from frame (13).
(6) Remove four screws (14), washers (15), and
locknuts (16) from back-up horn (12).
Separate bracket (5) from horn. Discard
locknuts.
Cleaning/Inspection.
b.
(1) Wipe parts clean with lint-free cloth.
(2) Check wires for cracks and fraying.
(3) Check metal parts for cracks, rust, holes, or other damage.
(4) Replace damaged parts.
Installation.
c.
(1) Install bracket (5) on horn (12) with four screws (14), washers (15), and locknuts (16).
(2) Install back-up horn (12) on frame (13) with screw (9), washer (11), and nut (10).
(3) Install wire (8) and tighten nut (7).
(4) Install wire (4) and tighten nut (6).
(5) Install wire (4) on bracket (5) with screw (1),
washer (3) and nut (2).
NOTE
Follow-on Maintenance: Connect negative
battery cables (para 4-90).
END OF TASK
4-332