TM 5-3895-369-l4
Section I. REPAIR PARTS, SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC
EQUIPMENT AND SUPPORT EQUIPMENT
4-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50-970 or CTA 8-100, as applicable to your unit. Table 4-1 lists tool kits required and authorized for use
at unit maintenance. Reference code numbers listed in column one correspond to those listed in the same column on
the MAC.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
The Maintenance and Allocation Chart (MAC) identifies the authority and responsibility for maintenance tasks listed
in this manual. Tool kits, test equipment, and diagnostic equipment required for performing unit maintenance tasks
are also identified in the MAC. The Mixer, Rotary Tiller Repair Parts and Special Tools List (RPSTL), TM 5-3895-
369-24P lists special tools, TMDE, and support equipment required to perform unit support maintenance procedures
contained in this manual.
4-3. REPAIR PARTS.
Repair parts arc listed and illustrated in the Repair Parts and Special Tools List, TM 5-3895-369-24P, covering unit
maintenance for the vehicle.
Table 4-1. Authorized Unit Support Tool Kits
Tool or Test
Maintenance
Equipment
Tool Kit
Ref Code
Level
Nomenclature
Stock Number
1
Tool kit, general mechanic's: automotive
5180-00-177-7033
0, F, H
Shop equipment, automotive maintenance and
4910-00-754-0653
0, F, H
repair: organizational maintenance
supplemental no. 1, less power
Shop equipment, automotive maintenance and
4910-00-754-0654
0, F, H
repair: organizational maintenance common
no. 1, less power
Shop equipment, organizational repair: light
4910-01-236-0166
0,F,H
truck mounted
Test set, battery: AN/PSM-13
6625-00-868-8344
0, F, H
Analyzer set, engine: portable solid state
4910-01-222-6589
0, F, H
(ST-E/ICE-PM)
4-5
