TM 5-3895-342-34
b.
Cleaning, Inspection and Repair.
a.
Removal.
(1) Clean drum plates with water and a stiff
(1) Place suitable jacking device under drum
bristled brush.
and raise drum just enough to free drum rollers of drum
(2) Inspect drum plates for wear and damage.
weight.
Repair or replace worn or damaged drum plates.
(2) Remove drum rollers and shaft in
c. Installation. Install the drum plates in reverse
numerical sequence as illustrated in figure 8-2.
of numerical sequence as illustrated in figure 8-1.
8-3. Drum Rollers and Shaft
1.
Nut, hex
7. Lockwasher
13.
Screw, socket hd set
2.
Lockwasher
8. Flange, sealing
14.
Roll, drum
3.
Washer, bevel
9. Gasket
15.
Roller, shaft, drum
4.
Bolt, mach hex hd
10. Ring, retaining
16.
Bearing, main roller
5.
Roller, drum ay
11. Bearing, ball
17.
Fitting, hyd
6.
Capscrew, hex hd
12. Seal, oil
18.
Bearing, main roller
Figure 8-2. Drum rollers and shaft, exploded view.
8-2
