TM 5-3895-342-34
c.
Cleaning, Inspection and Repair.
KEY to fig. 5-1:
(1) Clean all parts with cleaning solvent.
28.
Spring
(2) Inspect all parts for wear and damage.
1. Crank ay, discharge
29.
Pin, cotter
Repair or replace worn and damaged parts.
d. Reassembly. Reassemble discharge spout
2. Pin, cotter
30.
Box, snubber
3. Washer, cut
31.
Nut, hex
assembly in reverse of numerical sequence as illustrated
4. Wheel, hand
32.
Bolt, mach hex head
in figure 5-1.
5. Key
33.
Lockwasher
e. Installation. Install discharge spout assembly
6. Screw, cap hex head
34.
Nut, hex
7. Lockwasher
35.
Pin, Cotter
8. Fitting, grease
36.
Pin
9. Cover
37.
Bolt, mach hex head
10. Shaft, pinion discharge
38.
Nut, hex
11. Screw, set soc hd
39.
Lockwasher
12. Shaft, pinion discharge
40.
Bearing
13. Gear, Boston
41.
Collar, Set
14. Gear Case
42.
Screw, Set Soc Hd
15. Key, Gib
43.
Fitting, grease
16. Crank
44.
Lever
17. Bolt, mach hex hd
45.
Key, Gib
18. Lockwasher
46.
Nut, hex
19. Nut, hex
47.
Lockwasher
20. Screw, hex head
48.
Bolt, mach hex hd
21. Pin, Cotter
49.
Chute, discharge
22. Washer
50.
Bolt, mach hex hd
23. Snubber Subassembly
51.
Nut, hex
24. Rod, Connecting
52.
Lockwasher
25. Fitting, grease
53.
Clamps
26. Yoke end
54.
Guard, splash
27. Washer, cut
55.
Shaft
5-3
