TM 5-3895-369-14
(22)
Remove washer (48) and preformed
packing (49) from control shaft (2). Discard
preformed packing.
(23)
Remove control shaft (2), governor
spring (50) retaining pin (51) and pin seat
(52).
(24)
Remove nut (53), washer (54), and governor
shaft (55).
(25)
Remove and discard preformed packing (56)
from governor shaft (55).
(26)
Remove flyweight holder assembly (57),
washer (58), and shim (59).
(27)
Disassemble flyweight holder assembly as
follows:
(a)
Remove sleeve (60), washer (61), and
four flyweights (62) from flyweight
holder (63).
(b)
Remove plug (64) and cap (65) from
sleeve (60). Discard plug.
5-245
