TM 5-3895-369-14
(6)
Mark manual lever (15) and lever shaft (16)
to align in assembly.
(7)
Remove nut (17), lockwasher (18), manual
lever (15), spring (19), and shim (20).
Discard lockwasher and shim.
(8)
Remove preformed packing (21) and
washer (22) from lever shaft (16). Discard
preformed packing.
(9)
If damaged, remove two set screws (23)
and nuts (24).
(10)
If damaged, remove full load adjusting
screw (25), preformed packing (26),
nut (27), and washer (28). Discard
preformed packing.
(11)
Remove four screws (29) and housing
cover (30).
(12)
Remove and discard preformed packing (30)
from housing cover (29).
(13) Remove lever shaft (16).
(14)
Remove adapter (32) and sealing
washer (33). Discard sealing washer.
(15) Remove control valve (34).
(16)
Remove and discard two preformed
packings (35) from control valve (34).
5-243
