TM 5-3895-369-14
5-33. CLUTCH DRIVE ASSEMBLY REPLACEMENT (CONT).
(6)
(7)
(8)
(9)
Remove four screws (16) and
lockwashers (17) from left clutch mount (9)
and clutch (5). Discard lockwashers.
Remove four screws (18) and
lockwashers (19) from right clutch mount
(14) and clutch (5). Discard lockwashers.
Remove both clutch mounts (9 and 14) and
two rubber pads (20 and 21).
Mechanic operates lifting device while
assistant holds clutch lever (22) and guides
clutch assembly (5) from vehicle.
b. Installation.
Clutch assembly weighs 175 lbs (237 kg). Attach a suitable lifting device prior to installation to prevent
possible injury to personnel.
(1)
(2)
(3)
(4)
(5)
Mechanic operates lifting device while assistant moves clutch lever (22) back and guides clutch assembly
(5) into place in vehicle.
Place rubber pad (21) beneath right clutch mount (14) and install clutch mount on clutch (5) with four
lockwashers (19) and screws (18). Tighten screws 150 lb-ft (203 N•m).
Place rubber pad (20) beneath left clutch mount (9) and install clutch mount on clutch (5) with four
lockwashers (17) and screws (16). Tighten screws 150 lb-ft (203 N•m).
Install right clutch mount (14) on mounting
bracket (15) with two screws (13) four
lockwashers (12) and two locknuts (11).
Tighten locknuts 30 lb-ft (41 N•m).
Install left clutch mount (9) on mounting
bracket (10) with two screws (8), four
lockwashers (7), and two locknuts (6).
Tighten locknuts 30 lb-ft (41 N•m).
NOTE
1 of 12 screws was removed with ground
wire.
(6)
Install clutch (5) with 11 lockwashers (4)
and screws (3). Tighten screws 45 lb-ft
(61 N•m).
(7)
Connect hydraulic hose (1) to flow control valve (2).
5-200
