TM 5-3895-369-14
a. Removal.
Spilled hydraulic fluid is slippery. Clean
up spilled fluid immediately or injury to
personnel may result.
NOTE
•
Place suitable container with a
5 gallon (19 liters) capacity under flow
control valve to catch spilling fluid.
•
Brake pedal assembly removed
for clarity.
(1)
Disconnect hydraulic hose (1) from flow
control valve (2) and move hose out of way,
NOTE
1 of 12 screws was removed with ground
wire.
(2)
Remove 11 screws (3) and lockwashers (4)
from clutch housing (5). Discard
lo&washers.
Clutch and drive assembly weighs 175 lbs
(237 kg). Attach a suitable lifting device
prior to removal to prevent possible injury
to personnel.
(3)
Attach suitable lifting device to clutch (5).
(4)
Remove two locknuts (6), four washers (7), and two screws (8) from left clutch mount (9) and mounting
bracket (10). Discard locknuts.
(5)
Remove two locknuts (11), four washers (12), and two screws (13) from right clutch mount (14) and
mounting bracket (15). Discard locknuts.
5-199
