TM 5-3895-369-14
5-32. ENGINE HYDRAULIC PUMP DRIVE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
Materials/Parts
Compound, thread locking (item 15, appendix E)
Gasket
Equipment Condition
TM or Para
Para 5-32
Condition
Description
Hydraulic pump drive
removed.
a. Removal.
NOTE
Two attaching screws were removed with
gear pump assembly.
(1)
Remove pump drive (1) from gear
housing (2).
(2)
Remove pump drive gasket (3) from
accessory drive (1). Discard gasket.
b. Installation.
(1)
Install pump drive gasket (3) on accessory
drive (1).
(2)
Install accessory drive (1) in gear
housing (2). Ensure that gear mates
properly with injection pump gear and
camshaft gear inside housing.
NOTE
Follow-on Maintenance: Install hydraulic pump drive (para 5-32).
END OF TASK
5-197
