TM 5-3895-369-14
4-65. WATER PUMP ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanics: automotive
Wrench, torque
Materials/Parts
Cloth, lint-free (item 12, appendix E)
Compound, sealing (item 16, appendix E)
Gasket, preformed
Equipment Condition
TM or Para
Para 4-60
Para 4-67
Para 4-68
Condition Description
Radiator removed.
Fan assembly removed.
Drive belt removed.
a. Removal.
(1)
Remove two screws (1) and water pump (2)
from engine block (3).
(2)
Remove and discard gasket (4).
b. Installation.
(1)
Install gasket (4) in engine block (3).
Adhesive sealant causes immediate
bonding on contact with eyes, skin, or
clothing and also gives off harmful vapors.
Wear protective goggles and use in well-
ventilated area. If adhesive gets in eyes,
keep eyes open; flush eyes with water for
15 minutes; get immediate medical aid.
(2)
Apply sealant to water pump (2) and install
on engine block (3) with two screws (1).
Tighten screws 216 lb-in (24 N-m).
NOTE
Follow-on Maintenance:
Install drive belt (para 4-68).
Install fan assembly (para 4-67).
Install radiator (para 4-60).
END OF TASK
4-263
