TM 5-3895-369-14
4-43. TURBOCHARGER AIR INLET HOSE REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Cleaning/Inspection
c. Installation
Tools
Tool kit, general mechanics: automotive
Wrench, torque
General Safety Instructions
If engine has recently been in operation, allow
time for cooling before performing procedure.
Equipment
Condition
TM or Para
Para 4-90
Para 4-125
Condition Description
Negative battery cable
disconnected.
Hood removed.
a.
Removal.
NOTE
To remove air inlet hose as an assembly, perform steps (1) through (3) only.
(1)
Loosen clamp (1) and remove elbow hose (2) from turbocharger (3).
(2)
Loosen clamp (4) and remove hump hose (5) from air cleaner housing (6).
(3)
Remove air inlet hose as an assembly.
(4)
Remove two clamps (1 and 4).
4-198
