TM 5-3895-369-14
4-41. SHUTDOWN SOLENOID REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanics: automotive
Wrench, torque
MaterialslParts
Packing, preformed
Equipment Condition
TM or Para
Condition Description
Para 2-14
Left engine door open.
General Safety Instructions
If engine has recently been in operation, use
caution in performing procedure.
a.
Removal.
(1)
Tag, mark, and disconnect positive wire (1)
from terminal lug (2).
(2)
Remove nut (3), washer (4) and terminal
lug (2).
NOTE
Use caution when removing solenoid.
Plunger and spring at solenoid end can fall
off into pump.
(3)
Remove shutdown solenoid (5) and
preformed packing (6) from fuel injection
pump (7). Discard preformed packing.
b.
Installation.
(1)
Install preformed packing (6) and shutdown
solenoid (5) on injection pump (7). Tighten
solenoid 32 lb-ft (43 N•m).
(2)
Install terminal lug (2) with washer (4) and
nut (3).
(3)
Connect positive wire (1) on terminal
lug (2).
NOTE
Follow-on Maintenance: Close left engine
door (para 2-14).
END OF TASK
4-194
