TM 5-3895-369-14
5-90. ROTOR DRIVE ASSEMBLY REPAIR (CONT).
(11)
Install shim package (16), spacer (17),
pinion shaft (15), and bearing (18) in
bearing cage (12).
(12)
Spin cage (12) on shaft (15). Add or remove
shims (16) accordingly. Normal shim range
is 0.010 to 0.015 in. (0.1257 - 0.1381 mm).
(13)
If removed, install four studs (19) and 12
studs (20) on gear housing (21).
5-539
