TM 5-3895-369-l4
(21)
Remove hub assembly (49) and key (50)
from axle (1).
Keep hands out from under ring gear. Do
not allow ring gear to drop. Ring gear is
heavy and can cause injury if dropped on
hands.
Do not use a chisel to remove rivet heads,
as damage to ring gear may result.
(22)
Center punch each of 16 rivets (51) securing
ring gear (52) to hub (53).
(23)
Use a 15/32 in. drill bit to drill through rivet heads (51) to depth of 1/4 inch.
5-534
