TM 5-3895-369-14
5-90. ROTOR DRIVE ASSEMBLY REPAIR (CONT).
(3)
Apply anti-seize compound to center of
axle (4). Install key (5) and hub assembly (6)
on axle. Make sure that hub assembly is
completely against shoulder (7).
Do not heat bearings to more than 225°F
(107°C) or bearings will be damaged and
become unserviceable.
(4)
Heat bearings (8 and 9) in oven.
Handle hot bearings carefully with proper
protective equipment or injury to
personnel may result.
(5)
Carefully install bearing (8) on axle (4). Be
sure that bearing is completely against axle
shoulder (7).
(6)
Carefully install bearing (9) on axle (4). Be
sure that bearing is completely against gear
hub assembly (6).
5-537
