(42)
If tooth contact is like pattern E, move
pinion away from ring gear (14) by adding
shims, then repeat step (32).
(43)
When proper ring gear pattern is achieved,
tighten differential bearing cap screws (34)
150 to 160 lb-ft (200 - 220 N•m).
NOTE
Bearing adjuster may be turned slightly to
align lock.
(44)
Install two adjuster locks (37) and cotter
pins (38) on bearing caps (32 and 33).
TM 5-3895-369-14
INCORRECT PATTERN
• PATTERN TOO CLOSE OR OFF TOOTH ROOT.
PATTERN E
NOTE
Follow-on Maintenance: Install differential assembly (para 5-68).
END OF TASK
5-415
