TM 5-3895-369-14
5-69. DIFFERENTIAL ASSEMBLY REPAIR (CONT).
(39)
If tooth contact is like pattern B, increase
backlash. Repeat step (34).
(40)
If tooth contact pattern is like pattern C,
decrease backlash. Repeat step (35).
NOTE
To remove or add shims in steps (41)
and (42). remove pinion assembly
[steps (22) through (24) of Disassembly].
After shims are removed or added, install
pinion assembly [steps (22) through (31)].
(41)
If tooth contact is like pattern D, move
pinion closer to ring gear (14) by removing
shims, then repeat step (32).
5-414
