TM 5-3895-369-14
(8)
(9)
(10)
Check needle roller bearings for galling, scoring, nicks, cracks, or pitting.
Check thrust button for damage.
Replace all damaged parts.
c.
Assembly.
(1)
Install screw (8) and, if removed, thrust
button (9) in drive flange (3).
(2)
Apply grease inside each planetary gear (4)
and install two rows of 25 needle roller
bearings (6) separated by ring spacer (7).
(3)
Install six thrust washers (5) and three
planetary gears (4) on drive flange (3).
(4)
Install three planetary gear shafts (2) in
drive flange (3). Align holes in gear shafts
with holes in drive flange.
(5)
Install three roll pins (1) in gear shafts (2).
NOTE
Follow-on Maintenance: Install wheel end (para 5-66).
END OF TASK
5-391
