TM 5-3895-369-14
5-66. WHEEL END AND AXLE SHAFT REPLACEMENT (CONT).
Sealant causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
Do not use silicone sealer on drive flange
or drive flange may eventually work loose
causing severe damage.
(7)
Apply sealant on inside face of drive flange (2).
NOTE
Bolt holes may be aligned by rotating hub.
(8)
Align gears and install drive flange assembly (2) on hub (3) with 18 screws (1). Tighten screws
90 to 100 lb-ft (122 - 136 N•m).
NOTE
Follow-on Maintenance:
.
Install rear wheels (para 4-114).
.
Fill wheel ends with gear oil (para 4-178).
.
Check for leaks.
END OF TASK
5-388
