TM 5-3895-369-14
5-67. WHEEL END REPAIR.
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
Materials/Parts
Cloth, lint-free (item 12, appendix E)
Grease, general purpose (item 25, appendix E)
Materials/Parts
Solvent, drycleaning (item 54, appendix E)
Equipment Condition
TM or Para
Condition Description
Para 5-66
Wheel ends removed.
a.
Disassembly.
NOTE
This procedure is the same for both
wheel ends.
(1)
Remove three roll pins (1) from three
planetary gear shafts (2).
(2)
Remove three planetary gear shafts (2) from
drive flange (3).
NOTE
Planetary gears are supported on planetary
shafts by two rows of needle bearings that
are separated by a ring spacer in center
with a thrust washer on each end.
(3)
Remove three planetary gears (4) and six
thrust washers (5).
(4)
Remove two rows (25 each) of needle bearings (6), and ring spacer (7) from each planetary gear (4).
5-389
