TM 5-3895-369-14
5-56. HYDROSTATIC MOTOR REPAIR.
This task covers:
a. Disassembly
INITIAL SETUP
b. Cleaning/Inspection
c. Assembly
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
Shop equipment, general purpose repair: semi-
trailer mounted
Tool outfit, hydraulic system: test and repair, 3/4
ton, trailer mounted
Wrench, torque
Materials/Parts
Seal
Gasket
Ring, retaining
Packing, preformed (15)
Rings, back-up (2)
Solvent, drycleaning (item 54, appendix E)
Cloth, lint-free (item 12, appendix E)
Equipment Condition
TM or Para
Condition Description
Para 5-55
Hydrostatic motor
removed.
a.
Disassembly.
(1)
(2)
Protect exposed surfaces and cavities
from damage and foreign material.
Use caution so that rings and orifice
plate remain in place and do not fall
into pump housing.
All surfaces exposed are critical
and caution should be used to
avoid damage.
Remove retaining ring (1) and seal
assembly (2) from shaft end of motor (3).
Remove bronze seal (4) and preformed packing (5). Discard preformed packing.
5-345
