5-56. HYDROSTATIC
TM 5-3895-369-14
NOTE
End cap is under slight spring pressure.
Care should be taken when removing last
three screws.
(15)
Remove screws (34 and 35), washers (36),
and lifting bracket (37).
(16)
Remove end cap (15) from motor (3).
(17)
Remove gasket (38), bearing race (39), and
valve plate (40) from motor end cap (15).
Discard gasket.
(18)
If damaged, remove pin (41).
(19)
Remove bearing plate (42) and spacer (43)
from motor (3).
(20)
If damaged, remove three pins (44 and 45).
(21)
Remove rear bearing (46) and spacer (47).
5-348
