TM 5-3895-369-14
5-49. STARTER ASSEMBLY REPAIR (CONT).
(2)
Matchmark and remove two screws (8), end
cap (9), washer (10), and coil housing (11)
from drive housing (6).
(3)
If damaged, remove bushing (12) and
wick (13).
(4)
Remove locknut (14), two special
washers (15), screw (16) and special
washer (17) from drive housing (6). Discard
locknut.
(5)
Remove armature (18) with plunger (7),
rubber boot (19), and lever (20).
(6)
Remove pin (21) and separate parts.
(7)
If damaged, remove bushing (22) from drive
housing (6).
5-296