TM 5-3895-369-14
5-18. FLYWHEEL REPLACEMENT (CONT).
b. Installation.
(1) Install flywheel (7) and lean against flywheel housing (5) to prevent flywheel from falling out.
(2) Install eight screws (6).
NOTE
It may be necessary to hold crankshaft to
tighten screws.
(3) Tighten eight screws (6) 101 lb-ft (137 Nm)
in sequence shown.
(4) Install cover plate (4) and bracket (2) on
flywheel housing (5) with two screws (3).
Tighten screws 216 lb-in (24 Nm).
(5) Install hose (1) in bracket (2).
NOTE
Follow-on Maintenance:
Install ring gear (para 5-19).
Install engine assembly (para 5-8).
Install starter (para 4-72).
END OF TASK
5-154