TM 5-3895-369-14
5-16. ENGINE OIL SEALS REPLACEMENT.
This task covers:
c. Installation
b. Cleaning
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Condition Description
TM or Para
Tool kit, general mechanic's: equipment
Vibration damper
maintenance and repair
removed.
Flywheel removed.
Shop equipment, contact maintenance: truck
mounted
MateriaIs/Parts
Cloth, lint-free (item 12, appendix E)
Oil seals (2)
Compound, sealing (item 16, appendix E)
a.
Removal.
NOTE
Both front and rear oil seals are removed
the same way. Rear oil seal a shown.
(1) Drill two holes 180 apart in rear seal (1)
and install two No. 10 sheet metal screws.
(2) Using No. 10 sheet metal screws remove rear
seal (1). Discard rear seal (1) and No. 10
sheet metal screws.
(3) Repeat steps (1) and (2) for front seal.
b.
Cleaning. Wipe off all areas where oil has leaked with lint-free cloth.
5-149