TM 5-3895-369-14
5-15. VIBRATION DAMPER REPLACEMENT (CONT).
Installation.
C.
(1) Install damper (5) and spacer (4) on crankshaft (6) with four screws (3). Tighten screws incrementally
to 85 lb-ft (115 Nm) by tightening all four screws to 30 lb-ft (27 Nm), 50 lb-ft (68 Nm), and finally
85 lb-ft (115 Nm).
(2) Install adaptor (2) with four screws (1). Tighten screws 30 lb-ft (41 Nm).
NOTE
Follow-on maintenance: Install drive belt (para 4-68).
END OF TASK
5-148
