TM 5-3895-369-14
c.
Installation.
Sealant causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
sealant gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(1) Coat threads with pipe thread sealing
compound and install valve (1) in elbow (4)
and elbow on pipe (16).
(2) Install pipe (16) on frame (8) with two
screws (15), lockwashers (14). and nuts (13).
Tighten nuts 45 to 50 lb-ft (61- 68 Nm).
(3) Position hose (3) on frame (8) and install
bracket (12) and safety chain bracket (11)
with lockwasher (10) and screw (9). Tighten
screw 25 to 30 lb-ft (34 - 41 Nm).
(4) Install bracket (7) with lo&washer (6) and
screw (5). Tighten screw 25 to 30 lb-ft
(34 - 41 Nm).
4-539